Isothermal Container

The isothermal container allows for the safe transport of heat-sensitive products for 24 hours, both in summer and winter, with an adequate eutectic load.

For dry ice shipments (negative cold), our containers either reduce dry ice consumption by 20 to 30% (for the same duration of protection), or increase the duration of protection by 20 to 30% (for the same dry ice load) compared to all existing systems (in polyurethane, polystyrene, expanded polypropylene, etc.)

Description

Hospital applications

Isothermal protection suitable for the transport of heat-sensitive products for the following needs:

  • Health Logistics – Hospital Distribution
  • Delivery to in-patient departments
  • Delivery outside institutions (EHPAD, clinics, outsourced treatments)

Food applications

Isothermal protection suitable for the transport of fresh products, from the following sectors/needs:

  • Food industry
  • Ecommerce
  • Shipping of fresh produce

Capacity

  • Without internal cradle: 32 Litres useful
  • With internal cradle: 13 Litres useful

Format

Isothermal bin :

  • External size high: 537 x 350 x 330 mm
  • Low external size: 518 x 330 x 330 mm

Isothermal bin without cradle :

  • Inside size high: 477 x 286 x 252 mm
  • Low interior size: 455 x 262 x 252 mm

Isothermal bin with cradle :

  • Usable interior size: 375 x 170 x 190 mm

Duration of protection

  • From 10h to more than 24h with internal cradles and frozen eutectic packs
  • Up to 4.5 hours with refrigerated eutectic packs without internal cradles

Would you like more information about this product?

Click on this link: Get in touch

Not the product you were looking for?

No problem! Go to our homepage to select the product category that suits your needs.

Features :
  • Made of high density closed cell polyurethane foam with a density of 40/45 kg/m3 injected between an inner and outer skin of closed cell extruded polypropylene insulating foam of 35 kg/m3
  • Composed of a tank and a lid with a single-injected retractable cap guaranteeing maximum tightness
Special features :

Its design allows high results in terms of protection of sensitive products by integrating the 3 fundamentals of the cold chain (low conductivity, reflection, sealing) :

  • The use of high density closed cell polyurethane foam with the lowest conductivity of any insulation material on the market
  • The internal and external lining in metallised ISOPRO® foam, which reinforces the conductivity of the polyurethane thanks to the reflection of the metallisation.
    The external metallization reflects heat and radiation, the internal metallization reflects cold.
  • The single-injected tank and the inset plug avoid any risk of thermal bridges.
Inner cradle with frozen eutectic packs :

Allows you to :

  • Keep the products to be protected in the centre of the bin
  • Precise positioning of heat absorption sources (eutectic packs)
  • Ensure that they do not shift during transport
  • Avoid contact between heat-sensitive products and refrigeration sources
  • Prevent any risk of moisture generated by the refrigerants leaking onto the products to be transported
  • It is possible to modulate the duration of protection of the products (from 2 hours to more than 24 hours). Depending on the eutectic charge used.
Advantages :
  • Possibility of securing the bin with ties or safety lead
  • A label holder is available on both widths for a 95 x 80 mm label with 3 holding points
  • These bins are stackable : a peripheral lip holds the upper bins in place and prevents them from slipping during transport
  • Possibility of securing the bin with ties or safety lead
  • It has a minimum lifespan of 5 years
  • All components are unbundled and can be supplied separately for after sales service